| Click
here for:
Low-Cost
Dissolved Ozone Meter
The
E C O Z O N E M o d e l E Z - 1 0 W
Price $495.00 USD
 |
- For
checking residual dissolved ozone levels in bottled water, swimming
pools, spas, water treatment systems, aquariums, food washing
and canning, wineries, agriculture, cooling towers, research
projects, and much more.
- Equally
useful in the Plant, lab or field.
- Uses
50 ml samples. The sensor does not
contact the water. There are no interferences
from Chlorine or Salinity.
|
FEATURES
|
- No
fouling of the sensor. No special probe
installation. No sensor-water contact.
- Easily
understood by non-technical personnel. No
confusing chemistries or restrictions.
- Easy
to check calibration by standard kits and by
Eco Sensors ozone sources.
- Can
use AC power via low voltage adapter or can
use internal rechargeable batteries.
- Lowest
cost. No consumables.
|
SPECIFICATIONS
|
Range
|
0.1-0.7
ppm (mg/l). Other ranges possible by sample dilutions |
| Accuracy |
Approximately
0.1 ppm when operated near room temperature |
| Response
time |
About
10 seconds to 90% reading. Full reading at 1 minute. Reading time
is independent of the half-life of the ozone in the water sample |
| Measurement
Principle |
HMOS
(heated metal oxide semiconductor) sensor in headspace |
| Interferences |
None
from salt or typical levels of chlorine. Only likely interferences
are from strong VOCs |
| Bargraph
display |
PPM
marks + Green: 0-.2 ppm. Yellow: 0.25-0.40 ppm. Red: 0.50-0.70 ppm |
| Size
& Weight |
85
x 35 x 60 mm (3 ¼" x 1 3/8" x 2 3/8"), 154
grams (6 oz.) |
| Power
Requirements |
12-24
volts DC 300 mA. AC adapters available worldwide |
| Batteries |
Self-contained
NiMH. About 8 hour capacity. Recharged by AC adapter overnight |
Other
High Quality Products for Air Testing
- Pocket-size
digital ozone sensors
- 'Ozone Switch'
ozonator controllers
- Monitors with
alarms and data logging
- VOC monitors
- Ozone calibrators
and data loggers
|
|